Before you remove a Microsoft Exchange Server 2003 server from a production environment that has multiple servers in the administrative group, make sure that you know all the roles that are held by the server. Take steps to move those roles to another server before you follow the steps in this article to remove the Exchange Server. For example, the server may hold special roles such SRS server or routing group master, or the server could be listed as a bridgehead server on a connector such as an SMTP connector or a routing group connector.
Be sure to remove the Exchange Server after you transfer the server specific Exchange roles. If you forget this, you may experience adverse effects including the following:
- Mail flow may stop if the server is a Exchange bridgehead server.
- Mail flow may be adversely affected if the server is the routing group master, because the link state data for the remaining servers in the site is not updated for each other and the link state data for the remaining servers in the site is not updated to other sites.
- Outlook and OWA Free/busy problems may occur if the server is the site folder server.
- And many other effects that you will notice after the removal
Before you remove Exchange 2003, you must disconnect all mailbox-enabled users from the mailboxes on the Exchange server. It is not possible to remove an Exchange Server when it has mounted mailboxes. If you think it is enough to dismount and delete every Exchange store – you are wrong. This is not a solution.
After all mailbox-enabled users have been disconnected; you can use the Exchange 2003 Setup program to remove Exchange 2003.
If you are not able to use the Exchange 2003 Setup program to remove Exchange 2003, you can manually remove Exchange 2003. You must first stop and disable all Exchange services.
Then you must use Registry Editor to remove registry keys that are part of the Exchange installation. After you have removed the registry keys, you must remove and then reinstall Microsoft Internet Information Services (IIS). You must then reinstall any service packs or security updates that had been installed on your server.
High level Steps
I will not explain every step, because I think that some processes are self explanatory. If you have any questions, look through the Knowledge Base articles that you can find at the end of this article.
- Use the Active Directory User and Computers snap-in to disconnect all mailbox-enabled users
- Run the Exchange Server 2003 Setup program to remove the installed components
- Manually remove Exchange 2003
- Stop and disable the Exchange 2003 services
- Use Registry Editor to remove the Exchange registry keys
- Remove and reinstall the Internet Information Server (IIS) component
- Remove the Exchange 2003 server object from the Exchange 5.5 Admin program
- Remove the Exchange 2003 server from Active Directory
- Use the /removeorg switch to remove the whole Exchange 2003 organization from Active Directory
Stop and disable the Exchange 2003 services
Set the start up type of the following services to disabled and stop the services:
- Distributed Transaction Coordinator.
- Internet Information Services (IIS) Admin Service
- Microsoft Exchange Event
- Microsoft Exchange Internet Message Access Protocol (IMAP4)
- Microsoft Exchange Information Store
- Microsoft Exchange Message Transfer Agent (MTA) Stacks
- Microsoft Exchange Post Office Protocol version 3 (POP3)
- Microsoft Exchange Routing Engine
- Microsoft Exchange Site Replication Service
- Microsoft Exchange System Attendant
- Network News Transfer Protocol (NNTP)
- Simple Mail Transfer Protocol (SMTP)
Use Registry Editor to remove the following Exchange registry keys:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Exchange
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DAVEX
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EXIFS
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ExIPC
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EXOLEDB
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\IMAP4Svc
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeActiveSynchNotify
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeADDXA
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeAL
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeDSAccess
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeES
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeFBPublish
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeMGMT
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeMTA
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeMU
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeOMA
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeSA
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeSRS
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeTransport
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeWEB
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\POP3Svc
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RESvc
Remove and reinstall the Internet Information Services (IIS) component
Remove IIS over the Add/Remove feature of the computer. After you have removed Exchange, you can reinstall IIS if necessary.
Remove the Exchange 2003 server object from the Exchange 5.5 Admin program
If the Exchange 2003 server is installed in an existing Exchange Server 5.5 site, and you use the Exchange 5.5 Admin program, you must delete the Exchange 2003 server object from the Exchange 5.5 Admin program.
Remove the Exchange 2003 server from Active Directory
Start the Exchange System Manager to remove the server object expand Administrative Groups / “your administrative Group Name” /Servers.
Figure 1: Remove server in ESM
If you cannot run Exchange System Manager, you may use the ADSI Edit snap-in to manually remove the server attributes so that you can try a successful reinstallation. This method does not perform cleanups of references to the server object outside the server's own container.
ADSIEDIT is part of the Windows 2003 support tools. You can find the support tools on the Windows 2003 CD under the folder \Support\TOOLS. Install the support tools by double clicking SUPTOOLS.MSI.
Figure 2: Remove server with ADSIEDIT
Use the /removeorg switch to remove the whole Microsoft Exchange 2003 organization from Active Directory.
You can use the /removeorg switch with the Exchange 2003 Setup program to remove the whole Exchange 2003 organization from Active Directory.
The /removeorg switch removes the Organization container and all sub-containers from Active Directory. You can run this command from any server in the forest, not just from an Exchange 2003 server. This command does not remove services, files, or registry keys.
Important:
Do not use this method unless you want to remove Exchange completely from your enterprise. The /removeorg switch will remove all the Exchange servers from your organization. If you do this inadvertently, you may be forced to reinstall all the Exchange servers in your enterprise.
How to Remove the First Exchange 2003 Server Computer from the Site
Removing of Exchange 2003 if this machine is the first installed Exchange Server in the site (administrative group) is a little bit different from a normal Exchange deinstallation.
The high level steps are:
- Replicate All Public Folders to Another Server
- Rehome Connectors to Another Server
- Rehome the Schedule+ Free Busy Folder
- Remove the First Exchange 2003 Server Computer
- Rehome the Offline Address Book Folder
- Rehome the Recipient Update Service (RUS)
- Designate Another Server to Be the Routing Group Master
- Move Mailboxes to Another Server
The first Exchange Server 2003 computer that is installed in an administrative group holds the following important roles.
- Offline Address Book folder
- Schedule+ Free Busy folder
- Events Root folder, and other system folders
Replicate All Public Folders to another Server
All public folders and system folders that are housed on the first Exchange 2003 computer must be replicated to another Exchange 2003 computer that is in the site
Rehome the Recipient Update Service (RUS)
In Exchange System Manager, expand Recipients, and then click Recipient Update Services.
Under “General” click “Browse” right of “Exchange Server” and select the Server that should host the Recipient Update Service.
Figure 3: Rehome RUS
Designate another Server to Be the Routing Group Master
If this server is the routing group master, you must designate another server to be the routing group master.
Figure 4: Change the Routing Group Master
If this Exchange 2003 computer has the Site Replication Service (SRS) installed and running on it, you must create a new SRS in Exchange System Manager. To do this, follow these steps:
Start Exchange System Manager on the Exchange Server 2003 computer where you want to create the SRS, and then expand Tools.
Right-click Site Replication Service, click New, and then click Site Replication Service.
When you receive the “Are you sure you want to install a new Site Replication Service on this server (ServerName)” prompt, click Yes.
When you receive the order to create a Site Replication Service on the local machine, enter the password for the Exchange service account (Domain\service account) prompt, type the password for the Exchange service account.
This creates the SRS, and it also creates an associated configuration Connection Agreement.
Rehome Connectors to another Server
If this Exchange Server 2003 computer has any connectors that are hosted on it, these connectors must be rehomed to another server before you remove this Exchange 2003 computer from the routing group. For example, if the source server hosts an X.400 connector, you must set up this connector on the destination server. For information how to setup a SMTP connector see the following article:
http://www.msexchange.org/tutorials/Configuring-SMTP-Connector.html
Move Mailboxes to another Server
Use Active Directory Users and Computers or the Exchange System Manager to move mailboxes.
Remove the First Exchange 2003 Server Computer
Insert the Exchange Server 2003 CD in the CR-ROM drive in the Exchange 2003 computer, and then click Remove for each component that has been installed.
How to completely remove Exchange 2003 from Active Directory
You have to completely remove all instances of Microsoft Exchange 2003 from the Active Directory service.
Note:
This procedure will completely remove all instances of Microsoft Exchange Server 2003 from Active Directory.
SETUP/UPDATE/REMOVEORG
Exchange 2000 SP2 and later contains a setup command-line switch, /removeorg, that removes the Organization container and all sub-containers from Active Directory. You can run this switch from Exchange 2000 Server Service Pack 2 or later by using the following command: update.exe /removeorg. Additionally, you can run this command from any server in the forest, not just from an Exchange 2003 server. This command does not remove services, files, or registry keys.
In Exchange 2003 the switch /removeorg is part of setup.exe.
Figure 5: SETUP /REMOVEORG switch
The next steps are the following:
- Shut down the member server or domain controller where Exchange 2003 was installed.
- Restart the domain controller that you were using to remove the Exchange organization.
- Allow sufficient time for replication to occur between the domain controllers.
- Save the setup logs.
- Rerun setup /forestprep.
- Rerun setup /domainprep. If this is the same server that was used previously, move the old setup logs out.
- Verify permissions in the Exchange 5.5 organization. The user who is logged on must be in the group that was designated during forestprep and must have permissions on the Exchange 5.5 Organization, Site, and Configuration containers.
- Make sure that you can connect to all the Exchange 5.5 computers by using the Administrator program from the intended Exchange 2003 installation server, and then view the properties of the Exchange 5.5 servers.
- Remove the Administrator program from this server.
- Install Exchange 2003.
No comments:
Post a Comment